Beard Marine Parts - Marine Air Vector Turbo Self-Contained

Vector Turbo Self-Contained Series

The Vector Turbo Series completely revolutionized self-contained cooling and heating with the newest innovations in marine air conditioning system design.

The rust-free molded composite drain pan has three drains for the rapid removal of condensate water. The drain pan's sloped channels route condensate rapidly to a choice of three easy-to-plumb drain locations.

An advanced cushioning system results in quieter, virtually vibration-free operation. The enclosed blower motor eliminates overhang to provide easier operation. The high-velocity blower can be rotated 270 degrees with one adjustment screw. The unit's unique inlet ring is designed to optimize air flow and ensure that the height of the unit does not increase when the blower rotates.

Easy-to-install sound cover provides up to 50% noise reduction

These compact, easy -to-install sound covers are available for all StowAway Turbo models. The cover fits over the compressor, providing a 3-to 5-dB noise reduction- which is about a 50% drop in what the human ear can perceive. Installation takes just minutes and all mounting hardware is included.

Technical Specifications for Vector Turbo

Notes:

1) Add a C' or CK' after the capacity designator for 230V or 220-240V/50Hz units respectively. Examples STQ8 = 115V, STQ8C = 230V, STQ8CK = 220-240V/50Hz

2) BTU and electrical data are based on a 45°F/ 7.2°C evaporator and 100°F / 37.8°C condenser in cool mode, and a 45°F / 7.2°C evaporator and 130°F / 54.4°C condenser in heat.
3) Note: 60 Hz units must not operate at 50Hz and 50Hz units must not operate at 60Hz.
4) Electric box is remote mounted up to 34" (86cm) away from compressor. E-box dimensions are 2.7" (6.9cm) x 6.5" (16.5cm) x 8.8" (22.4cm)

† Refers to callouts shown in drawing below.

Back