Beard Marine Home

Seafari Escape
with EfficientSea Technology

Compact
SEC
200 to 600 U.S. Gallons Per Day
(757 to 2,271Liters)
 8 to 25 U.S. Gallons Per Hour
(30 to 95 Liters)
Seafari Escape Compact watermaker
The new Seafari Escape Compact (SEC) with its unique EfficientSea energy transfer technology brings efficient, compact, extraordinarily quiet watermaking to small and midsize power or sail boats. The unit's energy transfer device eliminates the need for a power-hungry high pressure pump, reducing the electricity consumption of the RO system by as much as 75%. The SEC Desalinator allows for easy installation in yachts previously could not physically accommodate conventional reverse osmosis systems.

Superior Watermaking, beyond the Horizon!

200 to 600
 U.S. gallons per day
 (757 to 2271 Liters)
8 to 25
 U.S. gallons per hour
 (30 to 95 Liters)
Specifications
Product Water Produced
per hour of operation:		             +-15% 841 psi / 58 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water

Model
Production Per Hour
Production Per 24 Hours
 
gallons/liters
gallons/liters
SEC 200
8 / 30
200 / 757
SEC 300
13 / 47
300 / 1,136
SEC 400
17 / 64
400 / 1514
SEC 600
25 / 95
600 / 2271
Salt Rejection (Chloride Ion):

Product Water Temp.:



Salinity Monitoring:




Salinity Range


Temperature Range:

System Feed Water:

Reverse Osmosis Membrane:


Chlorine Tolerance:

pH Range:

System Pressure:






External Installation
Water Connections:		 Minimum 99.2%, Average 99.4%

Ambient to feed water temperature. A slight increase in the product water temperature occur due to the heat transfer from the engine room and
feed pump.

The system monitors the salinity of the product water continuously and compensates for temperature variations. Only potable product water is
directed to the ship's potable water tanks. The product water quality is
continuously displayed on the system touch pad.

Designed for seawater use up to 50,000 ppm TDS (Nacl)
(typical seawater salinity is 35,000 ppm.)

Min. 33oF / .5oC Max. 91oF / 33oC

Flow: 50Hz, 1 - 3 gpm / 5 - 11 lpm; 60Hz, 2 - 4 gpm / 6 - 13 lpm

High Rejection/High Yield aromatic tri-polyamind, thin film composite,
spiral wound, single pass reverse osmosis membrane element.

0.1 ppm

3-11 (typical seawater pH is 8)

Feed Water: Minimum   80 - 185 psi / 6 - 13 bar / 6 - 13 Kg/cm2
                    Maximum 125 - 220 psi / 9 - 15 bar / 9 - 15 Kg/cm2

System Operation: Typical seawater has a salinity of 35,000 ppm TDS
and an average temperature of 77oF / 25oC. Under these conditions,
the system operating pressure is approximately 700 psi.

Pipe sizes to be supplied by the installer for connection of the Sea Recovery supplied components.
Feed Inlet:

 3/4" Female NPT Elbow
& 3/4" Male NPT x 1/2" Hose Barb Connector
Brine Discharge: 1/2" Female NPT Tee
Product: 1/4" Male NPT x 1/4" Tube Elbow
             

Electrical Motor Specifications

(HP = Horse Power; FLA = Full Load Amperes, LRA = Locked Rotor Amperes @ Start Up)

Alternating Current Systems:

System Hz VAC HP FLA LRA Hz VAC HP FLA LRA
SEC 200 gpd 50 115 .33 6 10 60 115 .33 6 9
SEC 200 gpd 50 230 .33 3 5.3 60 230 .33 3 4
SEC 400 gpd 50 115 .33 9 14 60 115 .33 7 12
SEC 400 gpd 50 230 .33 4 7 60 230 .33 4 6
SEC 600 gpd 50 115 .5 12 21 60 115 .5 10 19
SEC 600 gpd 50 230 .5 6 10 60 230 .5 5 8

Direct Current Systems:

System VDC HP FLA
SEC 200 gpd 12 .125 9
SEC 200 gpd 24 .125 5
SEC 400 gpd 12 .33 22
SEC 400 gpd 24 .33 11

Recommended Circuit Breaker:

Operating Voltage

Circuit Protection
Wire Size
AWG (min)

SEC 200 GPD

12 VDC
24 VDC
115 VAC
230 VAC
12 VDC

20 Amps
10 Amps
10 Amps
6 Amps
10 Amps
14 AWG
14 AWG
14 AWG
14 AWG
16 AWG
SEC 400 GPD
12 VDC
24 VDC
115 VAC
230 VAC
12 VDC

60 Amps
30 Amps
20 Amps
10 Amps
10 Amps
8 AWG
10 AWG
14 AWG
14 AWG
16 AWG
SEC 600 GPD
115 VAC
12 VDC
220 VAC

22 Amps
10 Amps
12 Amps
14 AWG
16 AWG
14 AWG

Feature and Benefits
  • Twenty-six years of marine reverse osmosis experience.
  • Extremely quiet, smooth, and with complete vibration isolation.
  • Ideal for small and midsize power or sail boats.
  • Exclusive Solid Salinity Meter, an essential tool for product water monitoring.
  • A failsafe Product Water Diversion Valve allows only safe drinking water to enter storage tanks.
  • Reverse Osmosis Membranes are high rejection, high yield, commercial grade, and chemically resistant.
  • Clear viewable Sea Strainer with a cleanable Monel Mesh Screen filter for ultimate corrosion resistance and large particulate removal.
  • EfficientSea Energy Transfer Device
  • Micro Processor Controlled Electronics provide state of the art technology and reliability with weekly Automatic Fresh Water Flush Timing (optional).
  • Stainless Steel, liquid filled exterior and interior Pressure Gauges for accurate measurement of system functions and corrosion resistance.
  • New Flow Meter for visual monitoring of the product water flow
  • All High Pressure Connections are composite 316L Stainless Steel for maximum corrosion and rust resistance.
  • Water Quality Indication LED
  • A comprehensive manual with exploded part views and and connection drawings for installation, operation, and maintenance.
  • Worldwide Service and Sales Network
  • One-Year Warranty on the System and Membranes.
  • Technical service and repair department dedicated to system performance excellence.
Go to Accessories
Go to Consumables
 
 
Horizon Seafari 200-600 GPD
Part Number Description GPH/LPH GPD/LPD
A39000020C Seafari Escape 200 Compact 8/32 200/757
A39000030C Seafari Escape 300 Compact 13/47 300/1136
A39000040C Seafari Escape 400 Compact 17/63 400/1514
A39000050C Seafari Escape 500 Compact 21/79 500/1893
A39000060C Seafari Escape 600 Compact 25/95 600/2271

Back to Watermakers

Contact us for more information.

Beard Marine Group Parts