Beard Marine Home

Seafari Escape
with EfficientSea Technology

Modular

SEM
200 to 600 U.S. Gallons Per Day
(757 to 2,271 Liters)

8 to 25 U.S. Gallons Per Hour
(30 to 95 Liters)
The new Seafari Escape Modular (SEM) with its unique EfficientSea energy transfer technology brings efficient, compact, extraordinarily quiet watermaking to small and midsize power or sail boats. The unit's energy transfer device eliminates the need for a power-hungry high pressure pump, reducing the electricity consumption of the RO system by as much as 75%. The SEM is ideal for sail and power boats with very limited onboard power, and even less onboard space. The system easily adapts to various boat designs and installation locations. The flexibility of this modular system provides a quiet, efficient watermaking system that will fit your boat perfectly.

The Watermaker you can't leave shore without!



200 to 600
 U.S. gallons per day
(757 to 2271 Liters)
8 to 25
 U.S. gallons per hour
(30 to 95 Liters)
Specifications
Product Water Produced
per hour of operation:
            +-15% 841 psi / 58 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water

Model
Production Per Hour
Production Per 24 Hours
 
gallons/liters
gallons/liters
SEM 200
8 / 30
200 / 757
SEM 300
13 / 47
300 / 1,136
SEM 400
17 / 64
400 / 1514
SEM 600
25 / 95
600 / 2271
Salt Rejection (Chloride Ion):

Product Water Temp.:



Salinity Monitoring:




Salinity Range


Temperature Range:

System Feed Water:

Reverse Osmosis Membrane:


Chlorine Tolerance:

pH Range:

System Pressure:






External Installation
Water Connections:
Minimum 99.2%, Average 99.4%

Ambient to feed water temperature. A slight increase in the product water temperature occur due to the heat transfer from the engine room and
feed pump.

The system monitors the salinity of the product water continuously and compensates for temperature variations. Only potable product water is
directed to the ship's potable water tanks. The product water quality is
continuously displayed on the system touch pad.

Designed for seawater use up to 50,000 ppm TDS (Nacl)
(typical seawater salinity is 35,000 ppm.)

Min. 33oF / .5oC Max. 91oF / 33oC

Flow: 50Hz, 1 - 3 gpm / 5 - 11 lpm; 60Hz, 2 - 4 gpm / 6 - 13 lpm

High Rejection/High Yield aromatic tri-polyamind, thin film composite,
spiral wound, single pass reverse osmosis membrane element.

0.1 ppm

3-11 (typical seawater pH is 8)

Feed Water: Minimum   80 - 185 psi / 6 - 13 bar / 6 - 13 Kg/cm2
                    Maximum 125 - 220 psi / 9 - 15 bar / 9 - 15 Kg/cm2

System Operation: Typical seawater has a salinity of 35,000 ppm TDS
and an average temperature of 77oF / 25oC. Under these conditions,
the system operating pressure is approximately 700 psi.

Pipe sizes to be supplied by the installer for connection of the Sea Recovery supplied components.
Feed Inlet:

3/4" Female NPT Elbow
& 3/4" Male NPT x 1/2" Hose Barb Connector
Brine Discharge: 1/2" Female NPT Tee
Product: 1/4" Male NPT x 1/4" Tube Elbow
             

Electrical Motor Specifications

(HP = Horse Power; FLA = Full Load Amperes, LRA = Locked Rotor Amperes @ Start Up)

Alternating Current Systems:

System Hz VAC HP FLA LRA Hz VAC HP FLA LRA
SEM 200 gpd 50 115 .33 6 10 60 115 .33 6 9
SEM 200 gpd 50 230 .33 3 5.3 60 230 .33 3 4
SEM 400 gpd 50 115 .33 9 14 60 115 .33 7 12
SEM 400 gpd 50 230 .33 4 7 60 230 .33 4 6
SEM 600 gpd 50 115 .5 12 21 60 115 .5 10 19
SEM 600 gpd 50 230 .5 6 10 60 230 .5 5 8

Direct Current Systems:

System VDC HP FLA
SEM 200 gpd 12 .125 9
SEM 200 gpd 24 .125 5
SEM 400 gpd 12 .33 22
SEM 400 gpd 24 .33 11

Recommended Circuit Breaker:

Operating Voltage

Circuit Protection

Wire Size
AWG (min)

SEM 200 GPD

12 VDC
24 VDC
115 VAC
230 VAC
12 VDC

20 Amps
10 Amps
10 Amps
6 Amps
10 Amps

14 AWG
14 AWG
14 AWG
14 AWG
16 AWG
SEM 400 GPD
12 VDC
24 VDC
115 VAC
230 VAC
12 VDC

60 Amps
30 Amps
20 Amps
10 Amps
10 Amps

8 AWG
10 AWG
14 AWG
14 AWG
16 AWG
SEM 600 GPD
115 VAC
12 VDC
220 VAC

22 Amps
10 Amps
12 Amps

14 AWG
16 AWG
14 AWG

Go to Accessories
Go to Consumables
 
 
Horizon Seafari 200-600 GPD
Part Number Description GPH/LPH GPD/LPD
A39000020M Seafari Escape 200 Modular 8/32 200/757
A39000030M Seafari Escape 300 Modular 13/47 300/1136
A39000040M Seafari Escape 400 Modular 17/63 400/1514
A39000050M Seafari Escape 500 Modular 21/79 500/1893
A39000060M Seafari Escape 600 Modular 25/95 600/2271

Back to Watermakers

Contact us for more information.

Beard Marine Group Parts